QSC, Portable Loudspeaker System, K Series, 1000W Active, 12" Woofer K12

84000
EMI from 7503
Availability: Not Available
Ships in 2 - 3 business days
(Delivery time may vary on shipping address)
Description:

Features:

  • 12” Woofer; 1.75” diaphragm compression driver
  • 90° Nominal coverage angle
  • Maximum SPL 131 dB peak
  • 1000 watt continuous Class D power modules in all models
  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance
    • DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
    • Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • Functions as a monitor wedge
  • 16 Gauge powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points
  • Eye-bold and Yoke Mount accessories available

Specification:

Configuration Multipurpose 2-way
Transducers
  Low-frequency
  High-frequency

12" cone transducer
1.75" diaphragm compression driver
Frequency Response (-6 dB) 52 Hz - 18 kHz
Frequency Range (-10 dB) 48 Hz - 20 kHz
Nominal Coverage (-6 dB) 75° conical
Maximum SPL1 131 dB peak

Amplifiers

Power Output2 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k
Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A

Enclosure

Material Impact resistant ABS
Finish Black paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 23.7" x 14" x 14"
603 mm x 356 mm x 356 mm
Weight (Net) 41 lb / 18.6 kg
Available Accessories K12 TOTE, K12 YOKE, M10 Kit-C

QSC, Portable Loudspeaker System, K Series, 1000W Active, 12" Woofer K12
If you wish to bring to our notice any discrepancies or errors in the product listing we request you to provide us the following details
Incorrect Image Poor Image
Incorrect Description Poor Description
Wrong Categorization

Subscribe Our Newsletter

Get regular updates by email.